Net-optics 8x1 Regeneration Taps Manual de usuario Pagina 1

Installation Guide for8x1 Regeneration TapsTM10G, 1G, and 10/100/1000 Speeds RG-800 SeriesDoc. 800-0164-001 Rev 2 PUBRG800U 8/10ANetwork ABNetwork BR

8x1 Regeneration Taps7Connecting PowerUse the following procedures to safely connect AC or DC power to the unit. Caution: ____________________________

8x1 Regeneration Taps8To connect DC input power on DC models: 1. If you have not already done so, unpack the Regeneration Tap and verify that you have

8x1 Regeneration Taps9Connecting to the Network1. Connect Network Port A to the appropriate switch Network or Span port using a an appropriate cable.

8x1 Regeneration Taps10Connecting to the Monitoring Devices1. If you have a ber model, install the appropriate SFP or SFP+ transceiver modules in th

8x1 Regeneration Taps11SpecicationsEnvironmentalTemperature: 0ºC to 40ºC (Operating), -10ºC to 70ºC (Storage)Relative Humidity: 10% min, 95% max, non

8x1 Regeneration Taps12Limitations on Warranty and LiabilityNet Optics offers a limited warranty for all its products. IN NO EVENT SHALL NET OPTICS, I

© 2010 by Net Optics, Inc. All Rights Reserved. www.netoptics.com

8x1 Regeneration TapsPLEASE READ THESE LEGAL NOTICES CAREFULLY.By using a Net Optics Regeneration Tap you agree to the terms and conditions of usage s

8x1 Regeneration TapsContentsIntroduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1K

8x1 Regeneration Taps1IntroductionNet Optics 8x1 Regeneration Taps solve the key physical layer challenges of multi-device network monitoring. For a b

8x1 Regeneration Taps2Inline or Span PortsModels are available for either inline or Span deployments. Inline models tap one link and create eight copi

8x1 Regeneration Taps3About This GuidePlease review this entire guide before attempting to install an 8x1 Regeneration Tap. The guide covers the follo

8x1 Regeneration Taps4Product DiagramsANetwork ABNetwork BRegen TapFull duplex100010010Push tochangemodeMode Change Button (recessed)16 RJ45 Monitor

8x1 Regeneration Taps5LED Indicators• Power LEDs: Each LED illuminates to show that power is being sourced by one of the power supples. • Link LEDs:

8x1 Regeneration Taps6Warnings on ProductWARNING:WarrantyvoidifremovedTwo of the labels illustrated above cover screws on the chassis top cover n